FERROUS CASTING
77.100 Ferroalloys
EN 26501:1992 Ferronickel - Specification and delivery requirements (ISO 6501:1988)
77.140.80 Iron and steel castings
EN 10283:1998 Corrosion resistant steel castings
EN 12454:1998 Founding - Visual examination of surface discontinuities - Steel sand castings
EN 1371-1:1997 Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2:1998 Founding - Liquid penetrant inspection - Part 2: Investment castings
EN 1559-2:2000 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
EN 1559-3:1997 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
EN 1561:1997 Founding - Grey cast irons
EN 1562:1997 Founding - Malleable cast irons
EN 1563:1997 Founding - Spheroidal graphite cast irons
EN 1564:1997 Founding - Austempered ductile cast irons
EN ISO 945:1994 Cast iron - Designation of microstructure of graphite (ISO 945:1975)
77.080.10 Irons
EN 10001:1990 Definition and classification of pig-irons
EN 12513:2000 Founding - Abrasion resistant cast irons
EN 1503-3:2000 Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards
EN 1560:1997 Founding - Designation system for cast iron - Material symbols and material numbers
EN 1561:1997 Founding - Grey cast irons
EN 1562:1997 Founding - Malleable cast irons
EN 1563:1997 Founding - Spheroidal graphite cast irons
77.140.20 Stainless steels
EN 10283:1998 Corrosion resistant steel castings
77.140.30 Steels for pressure purposes
EN 10028-1:2000 Flat products made of steels for pressure purposes - Part 1: General requirements
EN 10028-2:1992 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
EN 10028-3:1992 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
EN 10028-4:1994 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties

NON FERROUS CASTING
77.120.10 Aluminium and aluminium alloys
EN 12258-1:1998 Aluminium and aluminium alloys - Terms and definitions - Part 1: General terms
EN 575:1995 Aluminium and aluminium alloys - Master alloys produced by melting - Specifications
77.120.30 Copper and copper alloys
CR 12776:1997 Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materials
CR 13388:1998 Copper and copper alloys - Compendium of compositions and products
EN 1981:1998 Copper and copper alloys - Master alloys
77.120.60 Lead, zinc, tin and their alloys
EN 1179:1995 Zinc and zinc alloys - Primary zinc
EN 12659:1999 Lead and lead alloys - Lead
EN 1774:1997 Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
77.120.20 Magnesium and magnesium alloys
EN 12421:1998 Magnesium and magnesium alloys - Unalloyed magnesium
EN 12438:1998 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
77.120.40 Nickel, chromium and their alloys
EN 10095:1999 Heat resisting steels and nickel alloys
77.120 Non-ferrous Metals
EN 1179:1995 Zinc and zinc alloys - Primary zinc
77.150.10 Aluminium products
EN 12438:1998 Magnesium and magnesium alloys - Magnesium alloys for cast anodes
EN 1559-4:1999 Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings
EN 1676:1996 Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
EN 1706:1998 Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
EN 1780-1:1996 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system
EN 1780-2:1996 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system
EN 1780-3:1996 Aluminium and aluminium alloys - Designation of unalloyed and alloyed aluminium ingots for remelting, master alloys and castings - Part 3: Writing rules for chemical composition
EN 486:1993 Aluminium and aluminium alloys - Extrusion ingots - Specifications
EN 487:1993 Aluminium and aluminium alloys - Rolling ingots - Specifications
EN 576:1995 Aluminium and aluminium alloys - Unalloyed aluminium ingots for remelting - Specifications
EN 577:1995 Aluminium and aluminium alloys - Liquid metal - Specifications
EN 604-1:1997 Aluminium and aluminium alloys - Cast forging stock - Part 1: Technical conditions for inspection and delivery
EN 604-2:1997 Aluminium and aluminium alloys - Cast forging stock - Part 2: Tolerances on dimensions and form
77.150.30 Copper products
CR 13388:1998 Copper and copper alloys - Compendium of compositions and products
EN 1982:1998 Copper and copper alloys - Ingots and castings
77.150.60 Lead, zink and tin products
EN 12844:1998 Zinc and zinc alloys - Castings - Specifications
EN 1559-6:1998 Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings
EN 1774:1997 Zinc and zinc alloys - Alloys for foundry purposes - Ingot and liquid
EN 610:1995 Tin and tin alloys - Ingot tin
77.150.20 Magnesium products
EN 1559-5:1997 Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
EN 1753:1997 Magnesium and magnesium alloys - Magnesium alloy ingots and castings
EN 1754:1997 Magnesium and magnesium alloys - Magnesium and magnesium alloy anodes, ingots and castings - Designation system
77.150.99 Other products of non-ferrous metals
EN 1371-1:1997 Founding - Liquid penetrant inspection - Part 1: Sand, gravity die and low pressure die castings
EN 1371-2:1998 Founding - Liquid penetrant inspection - Part 2: Investment castings

77.180 Equipment for the Metallurgical Industry
EN 12883:2000 Founding - Equipment for the production of lost patterns for the lost wax casting process
EN 12890:2000 Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
EN 12892:2000 Founding - Equipment for the production of lost patterns for the lost foam casting process
EN 1559-1:1997 Founding - Technical conditions of delivery - Part 1: General